Every machine,liveon one screen.
Running, idle or in alarm right now, and how each shift went. Read straight from the CNC controller.
The shift sheet says 200.The controller says 164.
Counts written at shift end are rounded, late or guessed. Machinomics reads them from the CNC controller as each part finishes, so the number you plan with is the real one.
Shift sheet
Written by hand at 22:00
From the controller
Counted as each part finished
See it. Find the lost hours. Fix the next shift.
See
Every machine's state on one board, updated every few seconds.
Find
Idle and stop time per machine, with the reason the operator picked.
- Waiting for material3h 40m
- Tool change2h 10m
- No operator1h 25m
- Setup55m
Fix
A one-page report every morning, shift against shift.
Pick a screen. See what your shop will see.
Screens from the real app. Every reading comes straight from the CNC controller.
- Program
- O1042
- Spindle
- 2400 rpm
- Feed
- 1200 mm/min
- Parts
- 128 / 200
- Cycle
- 3m 08s
- 11:14Cycle start, O1042
- 11:02Feed hold, 12 min
- 10:48SV0401 Servo V-ready off, cleared
- Program
- O1042
- Spindle
- 2400 rpm
- Feed
- 1200 mm/min
- Parts
- 128 / 200
- Cycle
- 3m 08s
- 11:14Cycle start, O1042
- 11:02Feed hold, 12 min
- 10:48SV0401 Servo V-ready off, cleared
One floor, four people, four questions
- OwnerAre my machines earning what they cost?Utilisation by machine and monthAnalytics
- Production managerDid we hit the plan, and why not?Shift against shift, downtime reasonsDaily report
- SupervisorWhich machine needs me right now?Live state, alarms, feed holdsTV mode
- MaintenanceWhat keeps alarming, and when?Alarm history and tool lifeMachine detail
Will it work on my machines?
If the CNC controller has an Ethernet port, almost certainly. Nothing is fitted to the machine and nothing is written to it.
What we read
- Machine state
- Program number
- Part count
- Spindle and feed
- Alarms
- Tool life
Yes, this should connect.
Some controllers of this age need Ethernet switched on in settings. The app tests each machine before adding it.
From install to live board in an afternoon
No sensors, no add-on boxes. One app on one office PC reads every controller.
Install
Put Machinomics on an office PC on the same network as your machines. Windows or macOS.
Connect
Add each machine's controller IP. The app tests every one before it goes live.
Watch
Your floor shows up on your phone, your laptop and a TV on the shop floor.
Read-only by design. It never writes parameters, programs or macros to your CNC.
How many machine hours are you losing?
Put in your own numbers. The estimate is yours, not ours.
Built on our own shop floor first
We run a CNC machine shop. Machinomics watched our machines before it watched anyone else's, and it still does every shift.
- –Utilisation, before and afterMetric to confirm
- –Hours of idle time foundMetric to confirm
- –Machines connectedMetric to confirm
Customer quote goes here once a shop agrees to be named. Up to three lines, with name, role and company.
Priced by machine count
No setup fee. 14 days free, cancel anytime. Prices before GST.
Starter
Up to 5 machines
₹4,999/month
- Live board
- TV mode for the shop floor
- Utilisation per machine and shift
- Alarms
- Daily report
Growth
Most shops6-20 machines
₹14,999/month
- Everything in Starter
- OEE
- Downtime reasons
- Shift reports
- WhatsApp alerts
- Tool life
Enterprise
20+ machines or multiple plants
Custom
- Everything in Growth
- Multiple plants
- API and ERP export
- Priority support
Questions shops ask us
Something else? Send an enquiryCan it change anything on my machines?
No. It only reads. It never writes parameters, programs or macros to the CNC controller.
What happens if the internet goes down?
The app keeps reading your machines and holds every reading on the office PC. When the connection is back it sends them all, so nothing is lost.
Which controllers does it work with?
CNC controllers with a built-in Ethernet port. Use the checker above, or send us a photo of the controller and we will tell you before you pay anything.
Do I get a GST invoice?
Yes. Add your company's GSTIN under Billing and every invoice carries it.
Can I cancel anytime?
Yes. Cancel from Billing in the dashboard. No lock-in and no cancellation fee.
Where is my data stored?
In the cloud, kept separate for each company. Only the people you add can see your machines.
Your machines, live today
14 days free on up to 5 machines. No card needed to start.